2024 Vermeer® Bale Processor CPX9000

Information

2024 Vermeer® Bale Processor CPX9000

The Catapult® CPX9000 bale processor is a machine that offers power, versatility and easy operation. The Catapult processor allows material to be thrown 60 ft - 100 ft (18.3 m - 30.5 m), whether that be up and over feed bunks in a cattle operation or for land reclamation and erosion control purposes. Hydraulic controls make this machine easy to use, giving operators the ability to choose how the spout is angled and how the crop is distributed. The Catapult processor is available only at participating dealers.

Features may include:

Smooth material feeding

Optimizing productivity, the Catapult processor provides smooth material feeding by adjusting the feed rate of the bale chain bed to maintain a proper load and PTO RPM on the tractor.

Consistent material flow

Direct feed from a dual fan air circulation system provides consistent material flow from the tub to the spout, reducing inconsistent material flow common with non-direct feed systems.

Replaceable, abrasive-resistant steel liners

Replaceable, abrasive-resistant steel liners provide durability, especially needed when processing contamination-filled material like cornstalks.

Photos

Highlights

  • Flemingsburg, Kentucky
  • 2024
  • Vermeer®
  • Bale Processor CPX9000
  • Available
  • 10 ft

Specifications

  • 2024
  • Vermeer®
  • Bale Processor
  • CPX9000
  • General
  • horsepower minimum: 110 hp (82 kW) | horsepower recommended: 150 hp | 1000 rpm
  • horsepower: 210 hp
  • Torque Protection: 2 shear hubs
  • 16L-16.1SL 6 SofTrac II
  • Flail Drum: 1000 rpm | Fan - front: 1500 rpm | Fan - rear: 1000 rpm
  • 2 double-acting
  • 2000 psi
  • rate: 8 gpm
  • Axle: 12 in (30.5 cm) each axle | Flail description: 7/16 in x 5-9/16 in (1.1 cm x 14.1 cm) in tempered spring | Flail Drum Diameter: 26.8 in | Blower: (2) 38.6 in (98 cm) blower fans (1500 rpm front and 1000 rpm rear) | Horizontal spread distance: Up to 100 ft (30.5 m) | Bale size capacity: (2), 6 ft x 5 ft (1.8 m x 1.5 m) |
  • 15.6 ft | Flail Drum: 78 in
  • 10 ft
  • 8.4 ft
  • 19.8 ft
  • 7460 lbs | Drawbar: 2500 lbs | Bale capacity: 2500 lbs
  • Bale rotation: 3 roller chains with bolt-on cross slat | Cut Control Bar Quantity: 7
  • Cut Control Bar Adjustment: Hand lever with 5 settings
  • Drum: 30
  • Discharge Direction Right and left hand, a 260-deg rotation