2023 Vermeer® Trailed Mowers TM710

2023 Vermeer® Trailed Mowers TM710

Swipe to View More

  • Year 2023
  • Make Vermeer®
  • Model Trailed Mowers
2023 Vermeer® Trailed Mowers TM710

2023 Vermeer® Trailed Mowers TM710

2023 Vermeer® Trailed Mowers TM710

The trail to better mowing starts here.

Even before you start mowing, you will experience the simplicity of TM710 trailed mowers. It starts at hookup. Connect the hitch, PTO and hydraulics, and you’re ready to go to the field. Narrow transport widths and toolless suspension adjustments help you mow and go. Horsepower requirements (55 hp [40.4 kW]) are an average of 20% lower than comparable 3-pt disc mowers). Plus, it delivers the consistent, clean cut you’ve come to expect from Vermeer trailed mowers.

Features may include:

Easy hitch hookup

Hitch up easily. The hookup procedure is straightforward; after the hitch, PTO and hydraulics are connected it’s ready to go to the field.

Low horsepower requirements

Goes easy on horsepower, only requiring a 55 hp (41 kW) tractor for a 9.2 ft (2.8 m) cut.

Patented rubber torsion design

Absorbs shock loads with a patented rubber torsion design that keeps the weight of the cutter bar on the ground until it needs to float over field obstacles.

Hydraulic swing cylinder

Maneuvers around obstacles with ease, thanks to the hydraulic swing cylinder.

Quick-Clip blade retention system

Replace blades in seconds using the exclusive Quick-Clip™ blade retention system.

PTO

PTO Power, Rated Engine Speed Drive: 540 rpm | recommended: 55 hp

Drivetrain

Clutch Torque Protection: Driveline: friction disc clutch

Suspension

Suspension Rubber torsion

Wheels & Tires

Tires, Rear Specification 27x9.5-15

Operational

Operating Speed Disc: 2797 rpm

Hydraulics

Hydraulic Type 2 double-acting
Maximum Pressure 1250 psi
Hydraulic Flow Rate: 6 gpm

Chassis

Hitch/Type Drawbar

Dimensions

Dimensions Disc Diameter: 19.7 in
Transport Height 46 in
Transport Width 9.4 ft
Transport Length 15.3 ft
Cutting Width 9.2 ft
Height Working: 46 in | cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)
Width, Working Position 13.6 ft
Length Working: 14.3 ft

Weights

Weight Total: 2200 lbs | Tongue: 630 lbs

Features

Features Number of Discs: 7 | Number of Blades: 14
Construction Material Curtain: 1 ply 1/8 in rubber
Adjustability Angle: Manual turnbuckle

Product Photography